Please indicate the country where the purchase will be delivered. This will help us prepare your shipment.
Tell us what your language is. It will make it easier to configure your custom product!
Cabinet width
Tip: It is generally advisable to position the bathroom cabinet leaving about 20cm/25cm of space from the sanitary fixtures or the wall. If the dimensions you are looking for are not listed above, contact us.
Cabinet height
Attention: The height does not include the thickness of the countertop, which ranges from 12 to 20 mm depending on the chosen material. It also does not include any vessel sink. Wall-mounted units must be installed exclusively on masonry walls. In the case of plasterboard walls, proper reinforcement is required.
Cabinet depth
Attention: The depth of the bathroom cabinet also includes the door thickness of 19mm. The countertop will protrude a few millimeters beyond the depth of the structure.
Cabinet composition
Choose your preferred composition from the options listed below:
Type of handle
Customize your bathroom cabinet with the handle of your choice.
Matte lacquered finish
Choose the colour of the matte lacquer for your cabinet. The structure, doors, and drawer fronts will be fully lacquered in the selected color. The drawer interior has a grey fabric-effect finish, while the drawer sides are grey.
The colors listed are not enough for you? Then tell us the color of YOUR CHOICE:
Choose the colour of the matte lacquer for your cabinet. The structure, doors, and drawer fronts will be fully lacquered in the selected color. The drawer interior has a grey fabric-effect finish, while the drawer sides are grey.
Tap position
Note: The tap is not included. Please specify the type of tap you plan to install on the bathroom cabinet:
Would you like the countertop of your unit to include a tap hole?
If a hole is requested on the countertop, it will be made centered to the sink and at a distance of 5 to 7 cm from the back edge of the countertop. The hole will have a diameter of 3.5 cm. If you do not wish to have any hole for the tap on the top, we will not make any hole.
In both cases, the sink will start at a distance of 10 to 12 cm from the back edge of the countertop, depending on the selected sink model.
Type of sink
Choose the type of sink you prefer: you can opt for an integrated sink in the countertop or choose a vessel sink.
The standard height for the top edge of the basin or countertop is usually between 80 and 90 cm from the floor, but it may vary depending on the height of the person using the bathroom. On our “technical information” page, in the “info for your installer” section, you’ll find a diagram showing the drain positions in relation to the cabinet, which you can review with your installer.
For wall-mounted cabinets, it is important to ensure that the wall is suitable to support the weight of the unit. We recommend wall-mounting only on solid masonry walls. If you have a plasterboard wall, your installer must check that it is properly reinforced for this type of installation. The hardware included with the order is specifically designed for mounting on solid walls.
All our options are suitable for the bathroom environment and its requirements. To learn more about the differences between the materials, you can visit the “technical information” page on our website.
The countertops of our bathroom furniture can be cleaned with non-aggressive detergents. See our “technical information” page in the “care and maintenance” section for detailed instructions by material type.
Yes, absolutely. You can choose to order just the countertop without one of our vessel sinks. Please send us the technical sheet of your sink so that we can create the correct hole for drainage and, if needed, for the tap on the countertop.
The sink units of our bathroom cabinets are designed without a back panel to make it easier to connect plumbing pipes and any installation channels.
If there are exposed pipes, floor drains, or other specific situations that require significant clearance at the back of the unit, please contact us after consulting your plumber.
The materials we use for our countertops are designed to withstand daily use. However, some products – such as hair dye, abrasive cleaners or corrosive substances containing ammonia – may stain or damage the surface, especially with acrylic or composite materials. For this reason, we recommend using the countertop with care. Countertops or vessel sinks in ceramic or glass offer higher resistance to aggressive substances and are ideal for those seeking maximum durability and easy maintenance.
Each module is fully assembled in our factory, including doors and drawers. Modules are also pre-connected up to a maximum width of approximately 140 cm. For wider compositions, the unit will be shipped in multiple packages. The countertop and vessel sink (if included) are always shipped separately from the base unit.
For lacquered finishes, you can refer to the RAL or NCS color charts available at hardware stores, paint shops or online. It is also possible to request a sample of a melamine structure finish or a top material by writing to info@idaw.eu. The cost of a sample (including shipping) is €45.
If you choose a lacquered cabinet structure, you can select from the full range of RAL and NCS colors. If you choose a Tekhnos top and/or sink, it is also possible to customize the color to match the structure and create a unique unit. If you wish to request a custom color not listed among our options, write to us at info@idaw.eu to explore the possibilities together.
If the production of the order has not yet begun, it is always possible to make changes or additions. Please contact us as soon as possible. If production has already started, no modifications can be made, but you can still add items.
For orders over €511, delivery on the street is included. In this case, the truck driver is not allowed to carry the goods inside the house. As our cabinets are heavy and robust, two physically capable people must be present at the time of delivery. To see the delivery options available for your country, please visit our “shipping terms” page.
|
In which country will your order be delivered? Please indicate the country where the purchase will be delivered. This will help us prepare your shipment. What is your language? Tell us what your language is. It will make it easier to configure your custom product! |
