Please indicate the country where the purchase will be delivered. This will help us prepare your shipment.
Tell us what your language is. It will make it easier to configure your custom product!
WIDTH OF THE NICHE
The number of cabinet doors varies depending on the selected width. Enter the available width in cm.
For the configuration of a built-in cabinet of more than 540 cm wide, please contact us.
The maximum thickness tolerated for the skirting board is 1.5cm.
If your skirting board is thicker, you might have to remove it, in order to assemble the wardrobe, and if that is not possible, click here.
HEIGHT OF THE NICHE
There are 3 price categories based on the height of the niche:
Category 1 : up to 247 cm niche height
Category 2 : up to 263 cm niche height
Category 3 : up to 295 cm niche height
The on measure height within a category is free of charge.
For example, a fitted wardrobe with a 291 cm high niche is the same price as one with a 273.5 cm high niche because they both fall into the same category.
Height of the niche max. 295cm. With mirror doors max. 263cm.
The cabinet height is 246 cm (1 cm less than the measured height of the niche).
WARDROBE DEPTH
With a cupboard depth of 53 cm and less, the clothes rails are not automatically included.
The door thickness of 18 mm is always included in the cabinet depth.
Handle model
Here you can choose the door model that best suits you and your furnishings: In addition to our classic, puristic intervention variant integrated, we offer you various individual handle options. Of course, you can also have all doors mirrored - or upgrade your closet with a few mirrored doors.
FINISHING OF DOORS AND FILLERS
FINISHING
The colors listed are not enough for you? Then tell us the color of YOUR CHOICE:
MIRROR DOORS
Choose the type of mirror
Enter the position of the mirror doors from the left.
Clothes rail
Attention: Rods in SABBIA and RAL8019 finishes imply an additional charge. But this type of rod has a better hold than the chrome tubes.
LED LIGHTS INTEGRATED IN WARDROBE (vertical orientation)
SIDE PANELS
We will send you a large panel from which you can cut off the two side fillers yourself. This has the advantage that you can first assemble the cabinet and then measure the width of the fillers again exactly. In this way you can even out sloping walls, avoid a possible gap and achieve the best possible result. If you hire an installer, ask him or her if he has a suitable tool - saw - available to cut the panel. Professionals and carpenters usually have the opportunity to do this job smoothly.
Alternatively, do you want the side fillers - right and left - to be cut ready for installation according to the niche width you measured? This requires maximum accuracy when measuring the dimensions and is easier for you to assemble. It is best to remove the skirting boards on the sides of the wardrobe if it is possible - e.g. wooden skirting boards or coated pdf. However, we can also supply the side fillers with a cut-out for the skirting boards -for example for a tiled skirting board. If you wish so, please tell us the height and depth of the baseboards on the notes on the cart page. Attention, with our wardrobes, it is not possible to make a cut for the skirting board behind the wardrobe. The skirting board has to be removed or the wardrobe will stand at a distance from the wall equal to the thickness of the skirting board.
In case of an extra panel for self-cutting, the panel is 246 cm high and 45,4 cm wide.
ADD MORE ACCESSORIES NOW:
You can find information and pictures of our accessories here!
Two clothes rails are included per module. They can be assembled or not.
One shelf is included for each module. It has no fixed position and can be mounted at any height.
The style of the interior parts of the body is ivory-colored melamine with a wood design (see photo).
Extra panel for self-cutting
Extra panel for self-cutting with the same colour and finish of the wardrobe, fixed measures 292x45,4 cm
Extra panel on measure
Extra panel with the same colour and finish of the wardrobe, and cut according to the measures you supplied.
Maximum height: 294cm
Maximum width: 20cm
SHELVES
Note that one shelf is included free of charge per module. You can add more shelves here if you want more compartments in the closet.
Melamine with wood design, ivory color
INTERIOR DIVIDING PANEL WITH 5 SHELVES
Height of the internal partition 196.1 cm. For the 89 cm and 103 cm modules, the shelves can be placed to the left or right of the divider. With a 96 module, you have to choose whether the shelves are to the right of the divider (i.e. with a width of 50.2 cm) or to the left of the divider (i.e. with a width of 43.2 cm). Attention - This item must always be mounted on the base of the wardrobe, not on a shelf or chest of drawers.
Melamine with wood design, ivory color
A shorter clothes rail instead of the standard model.
INTERIOR DIVIDING PANEL WITH 3 SHELVES
Height of the internal partition 132.1 cm. For the 89 cm and 103 cm modules, the shelves can be placed to the left or right of the divider. With a 96 module, you have to choose whether the shelves are to the right of the divider (i.e. with a width of 50.2 cm) or to the left of the divider (i.e. with a width of 43.2 cm). Attention - This item must always be mounted on the base of the wardrobe, not on a shelf or chest of drawers.
Melamine with wood design, ivory color
A shorter chromed clothes rail instead of the standard model
PULL-OUT SHELF
Pull-out shelves with soft-close
DOUBLE DRAWER BOX HEIGHT H.35.5 cm
Melamine with wood design, ivory color If the drawer module is not to be installed on the base but at a different height, an additional shelf must be ordered on which the module can be placed.
TRIPLE DRAWER MODULE HEIGHT 51,5CM
Melamine with wood design, ivory color If the drawer module is not to be installed on the base but at a different height, an additional shelf must be ordered on which the module can be placed.
DRAWER HEIGHT 35,5CM - WIDTH 89
Melamine with wood design, ivory color If the drawer module is not to be installed on the base but at a different height, an additional shelf must be ordered on which the module can be placed.
PULL-OUT TROUSERS RACK - WIDTH 89
PULL-OUT TROUSERS RACKS, ivory-colored, only for modules with a width of 89 cm.
TIE AND BELT DRAWER - WIDTH 89
TIE & BELT DRAWER, ivory-colored, only for modules with a width of 89 cm.
INTERIOR MIRROR
Size 150 x 30 cm. Easy to install.
TELESCOPIC HANGER GRIPPER
Chromed metal, hook and non-slip gray plastic handle. 88 cm - 162 cm long.
DRESSES LIFT
This accessory allows you to easily reach even the clothes hanging at the top of the wardrobe. The clothes lift replaces the normal clothes rail. Therefore, when ordering this accessory, only one normal clothes rail per module is supplied (rather than the 2 normally included). Attention: we recommend hanging a maximum of 12kg of clothing, to guarantee its correct work.
DESIGN CHEST OF DRAWERS WITH INTEGRATED HANDLES
L 125cm D 55cm H 75,3cm
Chest of drawers in color and lacquer of the cabinet for a uniform style. The handles are recessed into the drawer fronts.
DESIGN BEDSIDE TABLE WITH INTEGRATED HANDLES
Widht 52,6cm Depth 46cm Height 45,6cm
Bedside cabinets in the same color and finish as the wardrobe for a uniform style. The handles are recessed into the drawer fronts.
DESIGN 7 DRAWERS CHEST OF DRAWERS WITH INTEGRATED HANDLES
Widht 52,6cm Depth 46cm Height 129,3cm
Chest of drawers in color and lacquer of the cabinet for a uniform style. The handles are recessed into the drawer fronts.
A fitted wardrobe is a cupboard that can be installed in a wall niche. But it can also fill an entire room width. In any case, there are walls to the right and left of the fitted cupboard. As a rule, closing panels are mounted on the right and left in a plane with the doors, so that the niche is completely filled.
A freestanding wardrobe does not need a niche, but is – as the name implies – free, behind the back is a wall. Not only we deliver lacquered doors but also lacquered side panels.
Yes. Corner cupboards are ideal if there is enough space. This is usually the case from 2 meters per wall unit. We offer different solutions in the design of our fitted or freestanding wardrobes. If you would like such a solution, please click at this link to go to the dedicated page of the configurator.
For the configuration select a fitted wardrobe, one side is attached to the wall (e.g. in the “half-niche”). Write a simple comment in the comments field of the order with the information, which side must be lacquered, and which side as a fitted wardrobe (the side cover panel will be provided) is to be produced. The price does not change.
No, you don’t. Please let us know the exact room height or the exact niche dimensions. Then we plan the wardrobe a little smaller (usually about 1 cm less high) so that it can be easily set up or inserted into the niche. On the other hand the width of the fitted wardrobe is already calculated with tolerance to built the wardrobe easily and to close it finally with the closing panels.
Preferably not, just measure from wall to wall, as if there were no skirting boards. Therefor please tell us separately or in the comments for order the dimensions of the skirting boards. This becomes even more important in the case of skirting boards wider than 1.5 cm, so that we can verify that the assembly is possible.
In the configurator of the fitted wardrobe we ask for the indication of the niche height. For a freestanding cupboard made on measure we ask for information on how high the cabinet should be made: This must always be at least 1 cm less than the ceiling height of the room. Otherwise, the cabinet could not be built.
Please let us know the available width without deduction. Only if baseboards are present or if they are not able to be removed, we must know their dimensions. (This becomes even more important in the case of skirting boards wider than 1.5 cm, so that we can verify that the assembly is possible.) It is also helpful if you send us a photo by email in parallel with your order.
We offer two options for this:
1. We deliver closing panels that are exactly tailored to your specifications. However, here it can be that due to small measuring errors, tolerances or sloping walls, not everything is exactly flush. Small gaps usually do not disturb or can be compensated with an acrylic joint.
2. Alternatively, we can send you a panel, a large strip (from 45.4 cm), from which you or a person commissioned by you can cut the panels accurately. This has the advantage that you can first mount the wardrobe and then the width of the panels is again measured exactly. This gives a more aesthetically pleasing result. You need a suitable saw for this. Specialists and carpenters but also home craftsmen usually have the opportunity to do this work very professionally. In our instructions you can see how the panels are installed. You can find this video here.
|
In which country will your order be delivered? Please indicate the country where the purchase will be delivered. This will help us prepare your shipment. What is your language? Tell us what your language is. It will make it easier to configure your custom product! |
